Hot Die, High Speed, Plastic Mould, Tool Steel

Approx. Rs 100 / KgGet Latest Price

M-35 steel is a medium-alloyed high speed tool steel, similar to M2, but with 5% cobalt added, providing better hot hardness and wear resistance. M35 high speed steel is suitable for heat treatment up to 66 HRC, and also offers excellent cutting performance and offers excellent cutting performance.

Steel Properties : This kind of steel is suitable for conditions involving thermal stresses and discontinuous cutting. Heavy-duty miling cutters of all kinds, gear cutter, highly stressed twist drills and taps, profile knives, machining of high-strength material, broaches.

Applications : It is one of the W-Mo Co HSS grade with good cutting character. The res hardness, hot hardness and wearing resistance are all better than W6M05Cr4V2.

Additional Information:

Approx. Rs 100 / KgGet Latest Price

Tremor alloys Steels is the largest Supplier & Stockiest of M2 in India.
M2 is a standard high-speed steel grade. Having balanced alloy composition forms the basis of its high toughness and good cutting edge retention, rendering it suitable for a large variety of applications.
This grade is mainly used for all metal-cutting tools for roughing or finishing such as twist drills, diverse milling cutters, thread dies, broaches, reamers, countersinks, thread chasers, circular saw segments, shaping tools and woodworking tools. Also highly suitable for cold-forming tools such as cold extrusion rams and dies, as well as cutting and precision cutting tools, plastic moulds with elevated wear resistance and screws.

Additional Information:

Approx. Rs 100 / KgGet Latest Price

M-2 Tool Steel is molybdenum based high-speed steel in tungsten–molybdenum series. HSS grade steel M2 is a medium alloyed high speed steel which has good machinability and red hardness properties. M2 high-speed steel has largely replaced T1 in most applications due to its superior properties and advantageous pricing.

Steel Properties : For all metal-cutting tools for roughing or finishing, such as twist drills, all kinds of milling cutters, screw taps, screw dies, broaches, reamers, countersinks, thread chasers, segments for circular saws, shaping tools and woodworking tools. Also highly suitable for cold-forming tools, such as cold extrusion rams and dies, as well as cutting and precision cutting tools, plastic moulds with elevated wear resistance and screws.

Applications : Standard high-speed steel grade. High toughness and good cutting power owing to its well-balanced alloy composition; thus suitable for a wide variety to applications.

It is typical steel grade of W-Mo current hss, with high toughness, good thermal plasticity, high hardness, as well as red gardness and hot hardness.

TGM2 is suitable for produce in high quality cutting tools, such as hob, knife, and milling cutter. TGM2A is suitable for produce in common cutting tools with high toughness, also suitable for cold-forming tools. M2 is suitable for produce common tools.

Additional Information:

Approx. Rs 100 / KgGet Latest Price

Additional Information:

Approx. Rs 100 / KgGet Latest Price

P20 is the Pre Hardened Plastic mould steel hardness distributed evenly in large cross sections that have excellent weldability with least hardness elevation, good mirror polishability and less streak texture making finishing easier. Size Section availability upto 255mm thickness. Supply hardness is 240-280 BHN.

Additional Information:

Approx. Rs 100 / KgGet Latest Price

DIN 1.2738 steel is one kind of plastic mold steel especially for big steel mold parts, it is equivalent to AISI P20+Ni tool steel.
Chemical Composition:hemical Composition : (%)

Critical Points:Critical Points : 

Smelting method : EAF+LF+VD+ESR

Main Characteristics : If futures excellent hardening penetration, good workability, polishing and photoengraving properties, This steel is used for plastic moulds of medium and big size. It can be subject to a nitriding treatment to improve its wear resistance.

Major Applications : Injections and thermoplastic extrusion moulds, rubber moulds, moulds carrier frames, container.
Supply Conditions : Hardened and Tempered Normal HP 280-320 & 380-400

Heat Treatments :

  Heat to 710-740 , with hold at minimum rate for 3 hours.

  Slow furnace cooling to 600 .

  To be carried out after machining and before the final heat treatment

  Heating to 530-580 for 2 hours.

  Preheating to 500-550

 Austenitizing at 840-880

 Oil or thermal bath cooling at 200-230 , then oil cooling according to the steel shape size

 Quenched hardness 52-54 HRC

 To be carried out after the hardening and when the steel is at 60-80 , at 500-600 according to the required hardness and with permanance for atleast 2 Hr.

 Cooling in air

Additional Information:

Approx. Rs 100 / KgGet Latest Price

M35 is cobalt content material in these high-performance excessive-speed steel results in high pink hardness and tempering resistance. As a final result, this grade is primarily suitable for conditions involving thermal stresses and discontinuous cutting.
This grade is typically used as heavy-duty milling cutters of every kind, particularly stressed twist drills and taps, profile knives, machining of high-strength substances, broaches

The cobalt content in this high-performance high-speed steel results in high red hardness and tempering resistance. As a consequence, this grade is particularly suitable for conditions involving thermal stresses and discontinuous cutting. Under the name Rapidur 3245, AISI M 35 + S and material number 1.3245, this steel grade is supplied with a higher sulphur content (S = 0.10 %).

Additional Information:

Approx. Rs 100 / KgGet Latest Price

Steels is the leading Supplier & Stockiest of M42 Steel in India.

M42 is a excessive-carbon, excessive-pace steel founded on molybdenum. Characterized by excessive put on resistance, red hardness and durability. For this reason of its low vanadium content, this grade reveals excellent grind ability.
This grade is most often used for die-sinking cutters, milling cutters and engraving machines together with gravers as good as for device bits in automatic lathes. Also suitable for non-reducing shaping (e.g. Cold extrusion rams and instruments employed in machining substances for the aviation industry equivalent to titanium alloys).

High-carbon, high-speed steel based on molybdenum. Characterized by high wear resistance, red hardness and toughness. As a result of its low vanadium content, this grade exhibits good grindability.

 For tools subject to severe mechanical wear (e.g. in case of small cross-section cuts at high cutting speeds). Particularly suitable for die-sinking cutters, milling cutters and engraving machines including gravers as well as for tool bits in automatic lathes. Also suitable for non-cutting shaping (e.g. cold extrusion rams and tools employed in machining materials for the aviation industry such as titanium alloys).

Additional Information:

Approx. Rs 100 / KgGet Latest Price

gest80 is a pre-Hardened, high performance, high precision, mold steel. Applications include plastic molds, rubber molds, jigs & fixtures, and press dies.

Smelting method : EAF+LF+VD+ESR

Main Characteristics : High monitoring performance even hardness, excellent discharging processing performance and texture processing performance. Molds can be used upon processing and no heat treatment is required.

Major Applications : Mirror plastic molds: Transparent plastic molds: optical instrument parts, compact disks, medical devices etc.

Molds underlining discharging processing surface quality.

Additional Information:

Approx. Rs 100 / KgGet Latest Price

Tremor Alloys Steel is the largest Supplier & Stockiest of HCHCR D2 in India.
D2 Steel Consolidates maximum wear resistance, great durability, exceptional front line maintenance and treating resistance. 12 % ledeburitic chromium steel. It can be nitride after special heat treatment. It can be utilized as threading rolls and dies, icy trimming, cutting and stamping tools for sheet thickness's up to 6 mm, accuracy cutting instruments for sheet thicknesses up to 12 mm.

HCHCR-D2 steel is Cold Work Steel with High Carbon High Chromium contents. The Quality with high wear resistant and toughness properties due to Vanadium addition of 0.90% . Normally it supply condition is an Annealed and will offer hardness to reach 57-59 HRC. It can be machinable in the annealed condition. D2 is the superior steels than D3 due to high alloys properties.

Additional Information:

Approx. Rs 100 / KgGet Latest Price

Tremor Alloys Steels is the largest Supplier & Stockiest of HCHCR-D3 Steel in India.
D3 Steel Having 12 % ledeburitic chromium tool steel with great wears resistance .
Basically utilized as cutting tools for sheets up to 4 mm thickness, trimming dies, blanking dies for paper and plastics, shear cutting edges and rotational shear edges for sheet thicknesses up to 2 mm.

D3 Steel having properties of High Carbon 2% and High chromium 12 % tool steel with high wear resistance. Its supply condition is normally annealed to easy machining which recommended hardness is 57-58 HRC after making the dies & tools.

Additional Information: