Silicon | 0.4 |
Iron | 0.4 |
Copper | 0.1 |
Manganese | 0.40-1.0 |
Magnesium | 4.0-4.9 |
Chromium | 0.05-0.25 |
Zinc | 0.25 |
Titanium | 0.15 |
Others, each | 0.05 |
Others, total | 0.15 |
Balance, Aluminum |
Approx. Rs 170 / Kg Get Latest Price
Minimum Order Quantity | 1 Kg |
Thickness | 0.05mm to 300mm |
Material | Aluminium |
Shape | Rectangular |
Brand | Hindalco / Balco / Jindal / European |
Material Grade | Series 1000,2000,3000,5000,7000,8000 |
Pattern | Plain and Chequered |
Approx. Rs 400 / Pack Get Latest Price
Product BrochureMaterial | Aluminum |
Size | 4Inch, 3Inch, 2Inch |
Type | Sheet and Plate |
Usage | Construction Purpose |
Aluminum 5083 plates have higher strength than 5052 plate and has exceptional thermal conductivity. In the tempered condition, it retains good formability due to excellent ductility. It is highly suitable for welding and can be hardened by cold work. Because Alloy 5083 exhibits excellent resistance to general corrosion, it is used in marine applications. Since Alloy 5083 is capable of withstanding extremely low temperatures without brittleness or loss of properties, it is especially suited to the cryogenic market.
Applications:Silicon | 0.4 |
Iron | 0.4 |
Copper | 0.1 |
Manganese | 0.40-1.0 |
Magnesium | 4.0-4.9 |
Chromium | 0.05-0.25 |
Zinc | 0.25 |
Titanium | 0.15 |
Others, each | 0.05 |
Others, total | 0.15 |
Balance, Aluminum |
Temper | Tensile Strength | Yield Strength | Elongation |
---|---|---|---|
KSI | KSI | % | |
O (annealed) | 42 | 21 | 14 |
H112 | 43 | 23 | 10 |
H116 | 46 | 33 | 10 |
H321 | 46 | 33 | 10 |
TREMOR ALLOYS stocks thicknesses from .250" - 2.00", widths up to 120" and lengths up to 300" or can accommodate any customer specific requirements. All material is fully certified to ASTM B209 and ASME SB209.
Approx. Rs 300 / Piece Get Latest Price
Product BrochureMinimum Order Quantity | 100 Piece |
Material | 7075 |
Shape | Rectangle |
Material Grade | Aluminium plate |
Pattern | Plain |
Silicon | 0.4 |
Iron | 0.5 |
Copper | 1.2-2.0 |
Manganese | 0.3 |
Magnesium | 2.1-2.9 |
Chromium | 0.18-0.28 |
Zinc | 5.1-6.1 |
Titanium | 0.2 |
Others, each | 0.05 |
Others, total | 0.15 |
Balance, Aluminum Alloy 7075 aluminum coil and sheet have been and remain the baseline standard with a good balance of properties required fore applications. 7075 aluminum is among the highest strength alloys available and used in highly stressed parts |
*Your information is safe with us.
Approx. Rs 180 / Kg Get Latest Price
Minimum Order Quantity | 1 Kg |
Shape | Round |
Material | Aluminium |
Grade | 1050,1100,2011,2014,2024,5083,5086,6061,6063,6082,6351,7020,7075,HE9,HE15,HE30 |
Tempered | O,T4,T6,T651 |
Approx. Rs 200 / Unit Get Latest Price
Product BrochureThickness | 0.1 - 300 mm |
Anodised | Yes |
Material | Aluminum |
Diameter | 0.5 mm to 250 mm |
Approx. Rs 300 / Kilogram Get Latest Price
Product BrochureMinimum Order Quantity | 100 Kilogram |
Material Grade | 2024 |
Pattern | Plain |
Shape | Rectangular |
Material | Aluminium plates |
ilicon | 0.5 |
Iron | 0.5 |
Copper | 3.8-4.9 |
Manganese | 030.-0.9 |
Magnesium | 1.2-1.8 |
Chromium | 0.1 |
Zinc | 0.25 |
Titanium | 0.15 |
Others, each | 0.05 |
Others, total | 0.15 |
Balance, Aluminum |
*Your information is safe with us.
Approx. Rs 300 / Pack Get Latest Price
Product BrochureMinimum Order Quantity | 100 Pack |
Material Grade | 7020 |
Material | Aluminium plate |
Approx. Rs 300 / Pack Get Latest Price
Product BrochureMinimum Order Quantity | 100 Pack |
Material Grade | 2017 |
Material | Aluminium plates |
o be called Aluminum 2017, an alloy must have a chemical composition that consists of:
Continental Steel offers Aluminum 2017 in a variety of shapes and sizes including sheet, plate, wire, tube, rod, and bar.
Approx. Rs 300 / Pack Get Latest Price
Product BrochureMinimum Order Quantity | 100 Pack |
Material Grade | 5754 |
Material | Aluminium plates |
Chemical Element | % Present |
---|---|
Manganese (Mn) | 0.0 - 0.50 |
Iron (Fe) | 0.0 - 0.40 |
Magnesium (Mg) | 2.60 - 3.60 |
Silicon (Si) | 0.0 - 0.40 |
Chromium (Cr) | 0.0 - 0.30 |
Copper (Cu) | 0.0 - 0.10 |
Manganese + Chromium (Mn+Cr) | 0.10 - 0.60 |
Other (Each) | 0.0 - 0.05 |
Others (Total) | 0.0 - 0.15 |
Titanium (Ti) | 0.0 - 0.15 |
Zinc (Zn) | 0.0 - 0.20 |
Aluminium (Al) | Balance |
*Your information is safe with us.
Approx. Rs 300 / Pack Get Latest Price
Product BrochureMinimum Order Quantity | 100 Pack |
Material Grade | 5154 |
Material | Aluminium plates |
Silicon | 0.4 |
Iron | 0.5 |
Copper | 0.1 |
Manganese | 0.20-0.70 |
Magnesium | 3.5-4.5 |
Chromium | 0.05-0.25 |
Zinc | 0.25 |
Titanium | 0.15 |
Others, each | 0.05 |
Others, total | 0.15 |
Balance, Aluminum The good results with welding and good corrosion properties in seawater make Alloy 5086 extremely popular in marine applications. Alloy 5086 has been used in vehicle armor plate due to its high strength factor. |
Approx. Rs 300 / Pack Get Latest Price
Product BrochureMinimum Order Quantity | 100 Pack |
Material Grade | 5005 |
Material | Aluminium plates |
Chemical Element | % Present |
---|---|
Manganese (Mn) | 0.0 - 0.20 |
Iron (Fe) | 0.0 - 0.70 |
Copper (Cu) | 0.0 - 0.20 |
Magnesium (Mg) | 0.50 - 1.10 |
Silicon (Si) | 0.0 - 0.30 |
Zinc (Zn) | 0.0 - 0.25 |
Chromium (Cr) | 0.0 - 0.10 |
Other (Each) | 0.0 - 0.05 |
Others (Total) | 0.0 - 0.15 |
Aluminium (Al) | Balance |
Approx. Rs 300 / Pack Get Latest Price
Product BrochureMinimum Order Quantity | 100 Pack |
Material Grade | Aluminium plates |
Material | 3103 |
Weight% | Al | Si | Fe | Cu | Mn | Mg | Cr | Ti+Zr | Zn | Others |
3103 | Bal | 0.50 max | 0.70 max | 0.10 max | 0.90 / 1.50 | 0.30 max | 0.10 max | 0.10 max | 0.20 max | 0.050 each 0.15 Total |
*Your information is safe with us.
Approx. Rs 300 / Kilogram Get Latest Price
Product BrochureMinimum Order Quantity | 100 Kilogram |
Material Grade | 5251 |
Material | Aluminium plates |
Element | % Present |
---|---|
Cu | 0.15 |
Mg | 1.7-2.4 |
Si | 0.4 |
Fe | 0.5 |
Mn | 0.1-0.5 |
Zn | 0.15 |
Ti | 0.15 |
Cr | 0.15 |
Al luminium 5251 is a medium strength alloy with good ductility and good formability. Alloy 5251 is known for work hardening rapidly and is readily weldable. It has a high corrosion resistance particularly in marine environments. | Balance |
Approx. Rs 300 / Kg Get Latest Price
Product BrochureMinimum Order Quantity | 100 Kg |
Material | Aluminium plates |
Approx. Rs 280 / Kg Get Latest Price
Minimum Order Quantity | 10 Kg |
Thickness | 0.2mm to 350mm |
Material | Aluminum Alloy |
Color | Silver |
Mn | Si | Cr | Cu | Fe | Zn | Al | Mg | Ti | Other Each/Total |
0.15 | 0.4-0.8 | 0.15-0.35 | 0.15-0.4 | 0.7 | 0.25 | Remainder | 0.8-1.2 | 0.15 | 0.005/0.15 |
Yield Strengtd (PSI) | Tensile Strengtd (PSI) | Shear Strengtd (PSI) | Elongation in 2″ | Brinell Hardness |
40,000 | 45,000 | 31,000 | 12 | 95 |
*Your information is safe with us.
Approx. Rs 300 / kg Get Latest Price
Product BrochureMinimum Order Quantity | 100 kg |
Material Grade | 1050 |
Brand | TREMOR ALLOYS |
Material | ALUMINIUM |
Chemical Element | % Present |
---|---|
Manganese (Mn) | 0.0 - 0.05 |
Iron (Fe) | 0.0 - 0.40 |
Copper (Cu) | 0.0 - 0.05 |
Magnesium (Mg) | 0.0 - 0.05 |
Silicon (Si) | 0.0 - 0.25 |
Zinc (Zn) | 0.0 - 0.07 |
Titanium (Ti) | 0.0 - 0.05 |
Other (Each) | 0.0 - 0.03 |
Aluminium (Al) | Balance |
Approx. Rs 300 / Kg Get Latest Price
Product BrochureMinimum Order Quantity | 100 Kg |
Grade | 1080 |
Material | Aluminium plates 1080 |
Aluminium Grade | ALUMINIUM PLATES 1080 |
Weight % | AL | Si | Fe | Cu | Mn | Ga | Mg | Zn | Ti | Others |
1080A | 99.8 min | 0.15 max | 0.15 max | 0.03 max | 0.02 max | 0.03 max | 0.02 max | 0.06 max | 0.02 max | 0.02 max e |
Other Specifications: 99.8% Aluminum
1A
Al 99.8
3.0285
Approx. Rs 300 / Kg Get Latest Price
Product BrochureMinimum Order Quantity | 100 Kg |
Material Grade | 3003 |
Material | Aluminium plates |
to be considered Aluminum 3003, an alloy most contain a certain chemical composition that includes:
*Your information is safe with us.
Approx. Rs 220 / Kg Get Latest Price
Product BrochureMinimum Order Quantity | 10 Kg |
Material Grade | 6082 / HE 30 /v64430 / 6351 |
Type | Plate |
Surface Treatment | Coated |
Alloy Or Not | Is Alloy |
Shape | Rectangle |
Is It Anodised | Not Anodised |
6082 is typically used in:
~ Highly stressed applications
~ Trusses
~ Bridges
~ Cranes
~ Transport applications
~ Ore skips
~ barrels
~ Milk churns
Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, 6082 is the alloy most commonly used for machining. As a relatively new alloy, the higher strength of 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy.
It is difficult to produce thin walled, complicated extrusion shapes in alloy 6082. The extruded surface finish is not as smooth as other similar strength alloys in the 6000 series.
In the T6 and T651 temper, alloy 6082 machines well and produces tight coils of swarf when chip breakers are used.
Chemical Element | % Present |
---|---|
Manganese (Mn) | 0.40 - 1.00 |
Iron (Fe) | 0.0 - 0.50 |
Magnesium (Mg) | 0.60 - 1.20 |
Silicon (Si) | 0.70 - 1.30 |
Copper (Cu) | 0.0 - 0.10 |
Zinc (Zn) | 0.0 - 0.20 |
Titanium (Ti) | 0.0 - 0.10 |
Chromium (Cr) | 0.0 - 0.25 |
Other (Each) | 0.0 - 0.05 |
Others (Total) | 0.0 - 0.15 |
Aluminium (Al) | Balance |
Mechanical Property | Value |
---|---|
Proof Stress | 255 Min MPa |
Tensile Strength | 300 Min MPa |
Elongation A50 mm | 9 Min % |
Hardness Brinell | 91 HB |
Approx. Rs 300 / Kg Get Latest Price
Minimum Order Quantity | 10 Kg |
Material | Aluminium 2014-T6 / HE15 / 24345 |
Grade | 2014-T6 / HE15 / 24345 |
Size | 3mm and above dia |
Tempered | T3,T4,T6 |
Shape | Round & Square |
Element | % Present |
Si | 0.50 - 0.90 |
Mn | 0.40 - 1.20 |
Mg | 0.20 - 0.80 |
Ti+Zr | 0.0 - 0.20 |
Al | Balance |
Ti | 0.0 - 0.15 |
Cr | 0.0 - 0.10 |
Ni | 0.0 - 0.10 |
Fe | 0.0 - 0.50 |
Cu | 3.90 - 5.00 |
Zn | 0.0 - 0.25 |
Others (Total) | 0.0 - 0.15 |
Other (Each) | 0.0 - 0.05 |
Approx. Rs 800 / Pack Get Latest Price
Product BrochureThickness | 0.2 mm - 200 mm |
Size | 2Inch, 4Inch, 3Inch |
Material | Aluminum |
Width Range | 100 mm - 1500 mm |
*Your information is safe with us.
Approx. Rs 300 / Pack Get Latest Price
Product BrochureMinimum Order Quantity | 100 Pack |
Size | 0.5mm and above thickness |
Material Grade | 2014 |
Pattern | Plain |
Material | Aluminium plates |
The chemical composition of Aluminum Alloy 2014 falls within the following parameters:
Approx. Rs 280 / Number Get Latest Price
Minimum Order Quantity | 1 Number |
Material | Aluminum |
Grade | 5052 |
Temper | H32 |
Width | 900 - 1600 mm |
Approx. Rs 300 / Kg Get Latest Price
Product BrochureMinimum Order Quantity | 100 Kg |
Material Grade | 5086 |
Material | Aluminium plates |
Silicon | 0.4 |
Iron | 0.5 |
Copper | 0.1 |
Manganese | 0.20-0.70 |
Magnesium | 3.5-4.5 |
Chromium | 0.05-0.25 |
Zinc | 0.25 |
Titanium | 0.15 |
Others, each | 0.05 |
Others, total | 0.15 |
Balance, Aluminum an aluminum alloy with the primary alloy element being magnesium. It is not strengthened by heat treatment, instead becoming stronger due to strain hardening, or cold mechanical working of the material. Since heat treatment doesn't strongly affect the strength, 5086 can be readily welded and retain most of its mechanical strength. | |
*Your information is safe with us.
Approx. Rs 300 / Kg Get Latest Price
Product BrochureMinimum Order Quantity | 100 Kg |
Material | 6063 |
Material Grade | Aluminium plate |
Element | 6063 % Present | 6063A % Present |
---|---|---|
Si | 0.2 to 0.6 | 0.3 to 0.6 |
Fe | 0.0 to 0.35 | 0.15 to 0.35 |
Cu | 0.0 to 0.1 | 0.1 |
Mn | 0.0 to 0.1 | 0.15 |
Mg | 0.45 to 0.9 | 0.6 to 0.9 |
Zn | 0.0 to 0.1 | 0.0 to 0.15 |
Ti | 0.0 to 0.1 | 0.1 |
Cr | 0.1 max | 0.05 |
Al It has a good surface finish, high corrosion resistance, is readily suited to welding and can be easily anodised. Most commonly available as T6 temper, in the T4 condition it has good formability | Balance | Balance |
Approx. Rs 300 / Kilogram Get Latest Price
Product BrochureMinimum Order Quantity | 100 Kilogram |
Material Grade | 5052 |
Material | Aluminium plates |
Chemical Element | % Present |
---|---|
Aluminium (Al) | Balance |
Chromium (Cr) | 0.15 - 0.35 |
Copper (Cu) | 0.1 max |
Magnesium (Mg) | 2.2 - 2.8 |
Manganese (Mn) | 0.1 max |
Remainder Each | 0.05 max |
Remainder Total | 0.15 max |
Silicon + Iron | 0.45 max |
Zinc | 0.1 max |
Approx. Rs 220 / Kg Get Latest Price
Minimum Order Quantity | 10 Kg |
Material | Aluminium |
Grade | 6082 / HE 30 / 64430 |
Tempered | T6 |
Element | % Present |
Al | Balance |
Si | 0.70 - 1.30 |
Mg | 0.60 - 1.20 |
Mn | 0.40 - 1.00 |
Cr | 0.0 - 0.25 |
Others (Total) | 0.0 - 0.15 |
Other (Each) | 0.0 - 0.05 |
Fe | 0.0 - 0.50 |
Zn | 0.0 - 0.20 |
Ti | 0.0 - 0.10 |
Cu | 0.0 - 0.10 |
*Your information is safe with us.
Approx. Rs 300 / Number Get Latest Price
Minimum Order Quantity | 1 Number |
Type | Sheet |
Material | Aluminium |
Usages | Industrial,Construction |
Approx. Rs 450 / Kilogram Get Latest Price
Minimum Order Quantity | 1 Kilogram |
Size | 1 inch-2 inch |
Shape | Round |
Brand | Tremor Alloys |
Material | Aluminium Brass Tubes |
Unit Length | 3m, 6m, 12m |
Type | Seamless |
Product Applications areas |
Heat Exchangers |
Refineries Power Plants |
Desalination Plants |
Ship Building & Ship Repairs |
Condensers |
Ferrules |
Distillers |
Guide to selection of tube materials |
Clear river, Lake or Canal water - |
Dissolved salts more than 2000 ppm |
Chloride less than 20 ppm |
H2S and Ammonia is less than 1 ppm |
Suspended solids less than 25 ppm |
For temperature more than 200 degree C and less than 450 degree C |
Permissible average velocity of water 1.8 to 2.0 meter / sec |
Standard | Symbol |
ASTM B 111 | C 68700 |
BS 2871 PART 3 | CZ - 110 |
EN 12451 | CuZN20 AL2As |
NFA 51 102 | CuZn22 Al2 |
JIS H - 3300 |
|
Approx. Rs 300 / kg Get Latest Price
Product BrochureMinimum Order Quantity | 100 kg |
Aluminium Grade | Aluminium plate 1200 |
Chemical Composition Limits | |||||||
Weight% | Si +Fe | Cu | Mn | Al | Zn | Ti | Others |
1200 | 1.0 max | 0.05 max | 0.05 max | 99.0 max | 0.10 max | 0.05 max | 0.05 (each) 0.15 (total) |
Bright: Principally used by the transport trucking industry this material is sourced from selected mills.
Mill: this refers to plate supplied ex mill with a commercial finish. This material is typically used in the marine industry, general engineering and transport industry where bright plate is not critical.
Linish: This is a customer negotiated linish that can be processed at the Atlas service centre.
|
3.8/5
Rated by 29 Users