Girgaon, Mumbai, Maharashtra
GST No. 27COLPS8751K1Z0
Instrumentation Fittings
Instrumentation fittings connect runs of tubing (for in-line, offset, multi-port, and mounting configuration) to other tubing sections, pipe, hose, or other components. Systems are typically configured with straight sections connected by fittings or specially formed connections and joints.
Instrumention fittings helps in consideration for leak prevention includes the type of connecting devices used in joining process pipe throughout the system and the experience level of those installing and maintaining the application
Types of Instrumention Fittings:
Front Ferrrule
Back Ferrule
Tube NUt
Tube Cap
Connector
Tube Union
Reducing Tube Union
Elbow Union
Tee Union
Cross Union
Bulkhead Union
Run Tee
Branch Tee
Tri Clover Clamp
Polypropylene Clamp
Stainless Steel Elbow Union
Approx. Rs 20 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Size | 1/16" to 2" OD |
| Material | SS |
| Brand | Tremor Alloys |
| Country of Origin | Made in India |
ELbow union is a compression type tube fitting that is sealed by pressure caused by the interaction of threaded portions of the fitting. It is used to join ends of two tubes without turning to tube to 90 Degree
Additional Information:
Tube Nut
Approx. Rs 10 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Usage/Application | Industrial |
| Quantity Per Pack | As per requirement |
| Packaging Type | Box Packing or Loose |
| Grade | 304, 304L, 316, 316L |
| I Deal In | New Only |
| Country of Origin | Made in India |
It is a metal fastener with two lines that are bent during installation, similar to staple or rivet. Typically made of thick wire with a half circular cross section
Additional Information:
Tri Clover Clamp
Approx. Rs 1,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Material | SS |
| Size | 1/2" OD to 8" OD |
| Type of Clamp | TC Clamp |
| Country of Origin | Made in India |
Tri Clover Clamp (also known as TC clamp) is a tubing connection system that allows making sanitary interconnections in stainless steel fluid transport systems. A connection is made using a hinged clamp to connect two lipped flanges, with a gasket between them to make a seal. One great thing about Tri clamp connections is that there is no female and male side of connection- both sides have the same flange type and are fully interchangeable. (Set contains body, ferrule and gasket)
Additional Information:
Tube Unions
Approx. Rs 105 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Size | 1/16" OD to 2" OD |
| Usage/Application | Pneumatic Connections |
| Brand | Tremor Alloys |
| Material | Stanless Steel |
| Material Grade | 304, 304L, 316, 316L |
Tube union is a compression type tube fittings that is sealed by external pressure caused by the interaction of threaded portions of the fittings. It is used to join straight ends of two tubes
Additional Information:
Socket Weld Fitting
Approx. Rs 200 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Piece |
| Size | Medium |
| Material | STAINLESS STEEL,ALLOY STEEL,CARBON STEEL,MONEL,NICKEL,INCONEL,HASTALLOY,TITANIUM,ALUMINIUM |
| Usage/Application | Structure Pipe |
| Connection Type | Female |
| Color | Silver |
Tremor is highly acclaimed Welded Pipe Fittings manufacturers in India. Stocking vast range of Stainless Steel 304 Welded Fittings to buy at best price in India, enquire our price of Inconel 625 Welded Fittings including Copper Nickel Cu-ni 70/30 Welded Pipe Fittings, Welded Fittings and A105 Carbon Steel Welded Fittings.
Petromet is fastest growing supplier of ASME B16.9 Welded Fittings to Thailand, Russia, Kuwait, France, Australia, Malaysia, USA, Iran, Italy, Sweden, Egypt, Bahrain, Turkey, UAE, Germany, Qatar, Singapore, Indonesia, UK, Israel, Oman,Canada, Sri Lanka & Saudi Arabia. Petromet is most trusted manufacturer of Welded Steel Fittings approved by Saudi Aramco. We maintain vast stock of Nickel Alloy 200 Welded Fittings. Petromet is stockholder and distributor of ASME Welded Fittings, Stainless Steel 304l Welded Pipe Fittings in various sizes.
We are largest supplying company of Carbon Steel Welded Fittings at best price as we are one of the largest supplier & trader of Duplex Steel Uns S31803 Welded Pipe Fittings in India. We have our stocking distributors in Delhi, Bangalore, Surat, (Gujarat), Hyderabad, Pune (Maharashtra) & Chennai in Tamil Nadu. Check once our ASTM A182 F22 Alloy Steel Welded Pipe Fittings price before buying Stainless Steel 310 Welded Fittings from India or China. also mail for our live stock of Alloy Steel Welded Fittings to check types & sizes with our ready stock we can give you best price of ANSI B16.9 Welded Fittings.
for Welded Stainless Steel Pipe Fittings to get affordable price. We are shipping Monel 400 Welded Fittings, Welded Elbow Fittings, Inconel 600 Welded Fittings & Stainless Steel 316 Welded Pipe Fittings at discounted prices due to reasonable man hours in India and significant source of high quality A350 LF2 Welded Fittings at best price available in Mumbai, India.
We can also provide free sample of Titanium Welded Fittings, Petromet is having our Dealer & Distributor in Aurangabad, Kolkata, Faridabad, Ludhiana, Chennai (Madras), Chhattisgarh, Vadodara, Tamil Nadu, Pune, Ahmedabad, Maharashtra, Nagpur, Bangalore, Punjab, Rajkot, Delhi, West Bengal, Khopoli, Raipur, Indore, Haryana, Gujarat, Uttar Pradesh, Jaipur, Rajasthan, Karnataka, Ghaziabad, Gurgaon, Kolhapur, Bhosari, Madhya Pradesh, Karnataka. So if you are looking for best price of Incoloy 800 Welded Pipe Fittings or Welded Copper Fittings, Stainless Steel 316l Welded Fittings near you with shortest time delivery or free sample of Hastelloy C276 Welded Fittings.
Additional Information:
Tee Union
Approx. Rs 100 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Size | 1/16" OD to 2" OD |
| End Connection Type | Threaded |
| Material | SS |
| End Type | Thread |
| Brand | Tremor Alloys |
| I Deal In | New Only |
| Country of Origin | Made in India |
| Grades | 304, 304L, 316, 316L |
| Type of Tee | Straight & Reducing |
Tee Union is a compression type tube fitting that is sealed by pressure caused by the interaction of threaded portions of the fitting. It is used to join ends of three tubes in a T Format.
Additional Information:
Cross Union
Approx. Rs 501 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Size | 1/16" to 2" OD |
| Material | SS |
| Usage/Application | Chemical Handling Pipe |
| Grade | 304, 304L, 316, 316L |
| Brand | Tremor Alloys |
| Country of Origin | Made in India |
Cross union is a compression type tube fitting that is sealed by pressure caused by the interaction of threaded portions of the fittings. It is used to intersect four tubes from all four sides
Additional Information:
Run Tee
Approx. Rs 1,002 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| End Connection Type | Threaded |
| Size | 1/16" to 2" OD |
| Material | SS |
| Usage/Application | Chemical Handling Pipe |
| Brand | Tremor Alloys |
| Grade | 304, 304L, 316, 316L |
Run Tee is a compression type tube fittings which offers Male / Female thread on one side of the Tee while center and other side allows you to insert tube
Additional Information:
Front Ferrule
Approx. Rs 50 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Size | 1/16" to 2" OD |
| Material | Stainless Steel |
| Design | Standard |
| Brand | Tremor Alloys |
| Grade | 304, 304L, 316, 316L |
| I Deal In | New Only |
| Country of Origin | Made in India |
Front ferrule is a mettalic sleeve that provides a seal when compressed between two mating fittings components. It is used to seal a joint between a tube and compression fittings
Additional Information:
Branch Tee
Approx. Rs 1,001 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Size | 1/16" to 2" OD |
| Material | SS |
| End Connection Type | Threaded |
| Usage/Application | Chemical Handling Pipe |
| Country of Origin | Made in India |
Branch Tee is a compression type tube fittings which offers Male/Female thread on center of the Tee while both other side allows you to insert tube
Additional Information:
INCONEL 718 Round Bars
Approx. Rs 1,500 / KgGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Kg |
| Material Grade | Inconel 718 |
| Type | Bar |
| Grade | 718 |
| Standard | TREMOR ALLOYS |
| Material | Nickel Alloy |
Inconel® Alloy 718 is a nickel-chromium-molybdenum super alloy designed for resisting a wide range of severely corrosive environments,crevice corrosion and pitting . This nickel alloy also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures. Inconel 718 is used from cryogenic temperatures up to long term service at 1200° F.
Additional Information:
Inconel 800 Bars
Approx. Rs 2,500 / KgGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Kg |
| Material Grade | Inconel 800 |
| Type | Bar |
| Grade | Inconel 800 |
| Standard | TREMOR ALLOYS |
| Material | Nickel Alloy |
Incoloy 800,Incoloy 800H , and Incoloy 800HT are nickel-iron-chromium super alloys. When exposed to high-temperature these alloys not only provide excellent resistance to oxidation and carburization but also good strength too. These nickel steel alloys are similar except for the higher level of carbon in Incoloy 800H, and the addition of up to 1.20 percent titanium and aluminum in Incoloy 800HT.
Additional Information:
Inconel 825 Rods
Approx. Rs 1,000 / KgGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Kg |
| Material Grade | Inconel 825 |
| Type | Bar |
| Grade | 825 |
| Material | Nickel Alloy |
Incoloy®Alloy 825 (Nickel-Iron-Chromium alloy) with addition of copper and molybdenum .Against aqueous corrosion it has better resistance as compared to Incoloy 800, otherwise both are same .To provide exceptional resistance against many corrosive environments is how the chemical composition of Incoloy®Alloy 825 is designed .Incoloy®Alloy 825 is specially resistant to sulfuric and phosphoric acids.
Additional Information:
Inconel 600 Round Bars
Approx. Rs 1,000 / KgGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Kg |
| Material Grade | Inconel 600 |
| Type | Bar |
| Grade | 600 |
| Standard | TREMOR ALLOYS |
| Material | Nickel Alloy |
Inconel® Alloy 600 is a nickel-chromiumsuper alloy. It is readily weldable and non-magnetic in nature and used in various corrosion resisting applications. The chromium content of the Inconel® Alloy 600 provides resistance to weaker oxidizing environments while the high nickel content provides exceptional resistance to chloride stress corrosion cracking and a level of resistance to reducing environments.
Additional Information:
Back Ferrule
Approx. Rs 10 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Size | 1/4" to 96" |
| Design | Standard |
| Material | Stainless Steel |
| Brand | Tremor Alloys |
| I Deal In | New Only |
| Grade | 304, 304L, 316, 316L |
| Country of Origin | Made in India |
A hose clamp or hose clip is a device used to attach and seal a hose onto a fitting
Additional Information:
Connector
Approx. Rs 10 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Type | Stainless Steel |
| Connection | Male & Female |
| Material | Stainless Steel 304, 304L, 316, 316L |
| Usage/Application | Pneumatic Connections |
| Size | 1/16" OD to 2" OD |
| Country of Origin | Made in India |
Connector is a compression type tube fittings which can be used to connect a thread side (Male / Female) to end of tube of another side.
Additional Information:
316 Stainless Steel Push in Fittings
Approx. Rs 110 / PieceGet Latest Price
Product Details:| Working Pressure | 0-2.0MPa 290psi |
| Size | All sizes |
| Usage/Application | Push in FIttings |
| Material | Stainless steel |
Stainless steel push in fittings (stainless steel push to connect fittings) from Tremor Alloys are made of SUS316 material. Tremor's stainless steel push in fittings come in a variety of types, models and sizes to satisfy various piping demands and provide essential links between components in fluid systems.
Stainless steel push in fittings (stainless steel push to connect fittings) are suitable for use in corrosive environments to carry aggressive fluids and for any application in the chemical industry.
Tremor Alloys stainless steel push in fittings are designed for use with teflon tubing, nylon tubing, polyurethane and polyethylene tubing that accommodate metric tubing O.D ranging from 4mm to 16mm and inch tubing O.D ranging from 1/8" to 1/2". Thread sizes range is from M3, M5, 10-24UNC, 10-32UNF to 1/2".
♦ Resistant to aggressive environments.♦ Suitable for food and beverage applications.♦ Elbows and Tees are made from forged 316 SS. The thread of elbows and tees can be 360° swiveled.♦ FKM (Viton) o-ring sealing in all stainless steel push in fittings.♦ Can be used with steam.♦ BSPT, NPT, Metric thread are both available.Tube Caps
Approx. Rs 10 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Material | Stainless Steel |
| Dimensions | 6mm OD to 50mm OD |
| Country of Origin | Made in India |
| Grade | 304, 304L, 316, 316L |
Tube Cap is designed to keep various pipes or tubes ends safe and secure. These caps offer a waterproof safety to the connections. These are mainly used for closing the ends of pipes & tubes
Additional Information:
Bulkhead Union
Approx. Rs 100 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Size | 1/16" to 2" OD |
| Material | SS |
| Usage/Application | Chemical Handling Pipe |
| Country of Origin | Made in India |
A bulkhead fitting allows piping connections to be made to a tank. A hole is cut in the tank into which the fitting body is inserted. A locknut threads onto the body to hold it in place. The locknut puts pressure on the gasket that allows it to make a liquid tight seal
Additional Information:
Electrofusion Reducer- Tee- End Cap- Elbow- Coupler- Tapping Tee- Tapping Saddle
-
-
-
- +2
Approx. Rs 160 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Size/ Diameter | 20mm and above |
| Brand | Tremor |
| Fitting Type | Coupler, Elbow, Reducer, Tee, Tapping Tee, End Cap, Tapping Saddle, Transition Fittings |
| Usage/ Application | Water, Gas, Electricity |
| Country of Origin | Made in India |
| Fittings confirm to EN 1555-3:2002, BS EN 12201-3:2003, GIS-PL-2-4:2008 | |||||||||||
| Coupler - 20mm to 200mm | |||||||||||
| Elbow - 20mm to 83mm | |||||||||||
| Reducer - 25x20, 32 x 20, 32 x 25, 40 x 32, 50x32,50x40,83x32,125x83 | |||||||||||
| Tee - 20 mm to 83mm | |||||||||||
| Tapping Tee - 32x20 | |||||||||||
| 83,75,90,110,125,140,180,200 X (20/25/32) | |||||||||||
| End Cap : 20mm to 160mm | |||||||||||
| Tapping Saddle - 63,75,90,110,125,140,160,180, 200, 225 X (2"-3/4" - 1") | |||||||||||
| Transition Fittings - 20X1/2", 25 x 3/4", 32 x 3/4", 32 x 1" | |||||||||||
Additional Information:
Polypropylene Clamp (PP Clamp)
Approx. Rs 1,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Size/ Diameter | 1/4" OD to 4" OD |
| Brand | Tremor Alloys |
| Material | Polypropylene and Aluminium |
| Country of Origin | Made in India |
A polypropylene clamp (also know as PP Clamp) is designed for fastening and installing tubes under heavy mechanical pressure and normal mechanical pressure. This clamp is designed for tubes, pipes and cables for outside diameter from 6mm to 100mm
Additional Information:
Explore More Products
Tremor Alloys
Mumbai - 400004, Maharashtra, India
© Tremor Alloys. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited