Approx. Rs 5,000 / Kilogram Get Latest Price
| Minimum Order Quantity | 1 Kilogram |
| Material | MOLYBDENUM TUBES |
Name | Outer Diameter (mm) | Wall Thickness (mm) | Length (mm) | |||
|---|---|---|---|---|---|---|
Size | Tolerance | Size | Tolerance | Size | Tolerance | |
Molybdenum Tube/Pipe | <100 | ±1.0 | <1 | ±0.1 | <100~150 | ±2.0 |
100~200 | ±2.0 | 1~3 | ±0.25 | 150~350 | ±3.0 | |
200~300 | ±3.0 | 3~10 | ±0.5 | 350~650 | ±4.0 | |
300~400 | ±5.0 | 10~20 | ±1.0 | 650 ~ 2000 | ±5.0 | |
>400 | ±7.0 | 20 ~ 30 max | ±1.0 | 2000 ~ 6000 max | ±5.0 |
Approx. Rs 5,000 / Kilogram Get Latest Price
an acronym for titanium-zirconium-molybdenum and is typically manufactured by powder metallurgy or arc-casting processes. It is an alloy that has a higher recrystallization temperature, higher creep strength, and higher tensile strength than pure, unalloyed molybdenum. Available in rod and plate form, it is often used for hardware in vacuum furnaces, large x-ray equipment, and in creating tools. While incredibly versatile, TZM is best utilized between 700 and 1400°C in a non-| Element | Content (%) |
| Molybdenum, Mo | 99.40 |
| Titanium, Ti | 0.5 |
| Zirconium, Zr | 0.08 |
| Carbon, C | 0.02 |
| Density | lb/in3 | 0.37 |
| gm/cm3 | 10.22 | |
| Melting Point | °F | 4753 |
| °C | 2623 | |
| Thermal Conductivity | Cal/cm2/cm°C/sec | 0.48 |
| Specific Heat | Cal/gm/°C | 0.073 |
| Coefficient of Linear Thermal Expansion | micro-in/°F x 10-6 | 2.50 |
| micro-in/°C x 10-6 | 5.20 | |
| Electrical Resistivity | micro-ohm-cm | 6.85 |
Approx. Rs 5,000 / Kg Get Latest Price
| Minimum Order Quantity | 1 Kg |
| Material | MOLYBDENUM PLATES |
| Brand | TREMOR ALLOYS |
Thickness | Max. Width | Max. Length | Thickness Tolerance |
|---|---|---|---|
0.090" ~ 0.200" | 30" | 114" | +/- 0.008" |
0.200" ~ 0.250" | 24" | 84" | +/- 2% |
0.250" ~ 0.500" | 24" | 42" | +/- 2% |
>0.500" | 24" |
| +/- 2% |
Surface Condition:Surface can be supplied in a shiny, matte, satin, or as-rolled condition; dependent upon thickness and width parameters.
*Your information is safe with us.
Approx. Rs 5,000 / Kilogram Get Latest Price
Our molybdenum wire is produced by stretching the Molybdenum rod to various diameter after the rod undergo the pass rolling and rotary forging to about 3mm. The Advantages of our molybdenum wire are with good stability, good tensile strength, high precision cutting and low elongation. Our factory canOur molybdenum wire is produced by stretching the Molybdenum rod to various diameter after the rod undergo the pass rolling and rotary forging to about 3mm. The Advantages of our molybdenum wire are with good stability, good tensile strength, high precision cutting and low elongation. Our factory can provide various of molybdenum wires with the diameter among 0.18~3.0mm, we can also provide custom products as your requirements. We offer 2,000 to 3,000 kg pure molybdenum wire products per month. Standard availability is described below. Other sizes and tolerances are available.
| ||
|---|---|---|
Molybdenum Wire Types | Diameter (inch) | Tolerance (%) |
|---|---|---|
Molybdenum Wire for EDM | 0.007" ~ 0.01" | ±3% wt |
Molybdenum Spray Wire | 1/16" ~ 1/8" | ±1% to 3% wt |
Molybdenum Wire | 0.002" ~ 0.08" | ±3% wt |
Molybdenum Wire(clean) | 0.006" ~ 0.04" | ±3% wt |
|
